is a next-generation fraud detection and prevention system that is capable of identifying and thwarting a wide range of sophisticated attacks before losses occur. Developed from the ground up this next-generation system is designed to detect and stop fraud incidents in near real-time. Real-time analysis Unlike conventional SMDR / CDR analysis solutions, which simply examine switch call records after the fact, FraudCatcher fraud detection and prevention system uses a passive network probe to pro-actively and continuously analyze telecoms traffic in real-time. FraudCatcher interfaces are installed in the enterprise to detect attacks aimed at the business and once an attack is detected, the fraud management system may instruct the interface to drop the line.
Home  >  Products  >  FraudCatcher
Technical specifications
Interface specifications
Audio processing
Safety and EMI certification
Mechanical characteristics: Compact aluminium box with power supply adaptor Operating temperature: 0 ºC to +60 ºC Humidity: 5% to 80% non-condensing Maximum power requirements: Mains adaptor +12Vdc (500 mA)   Operating systems supported: All 32-bit and 64-bit Windows Operating Systems
Basic Rate interface: 4 wire So bus AC impedance:  Line Matched Maximum cable length: 10 m (loop through) Protocols: Euro-ISDN Primary Rate interface: E1 (2.048Mbit/s) AC impedance: 1100 Ω Maximum cable length: 10 m (loop through or tap) Protocols: All major ISDN variants, Q.SIG, DASS-2 and DPNSS
Upstream and downstream receive audio gain: Programmable via TCP/IP Frequency response: 300-3400Hz Speech encoding: 64kbit/s A-law (G.711)
Safety, emissions, immunity: EN 60950, EN 55022, EN 55024 Compliance: CE, FCC and RoHS2 MTBF: 600.000 hours Warranty: 3 years
•     Compact aluminium box with telecoms interfaces and 10/100 Mbit/s Ethernet port •     Non intrusive and undetectable high impedance passive monitoring •     Dialled number and Caller ID signalling support •     Digital Signal Processors for voice streaming and on-board D-channel protocol processing •     Protocol support for all major ISDN variants, Q.SIG, DASS-2 and DPNSS •     Supports all 32-bit and 64-bit Windows version •     Remote TCP/IP accessibility for system configuration and FLASH memory upgrading •     Fully stand-alone embedded operation of the hardware device •     High quality voice streaming for live monitoring •     Audio snapshots sent by E-mail as WAV attachments •     CE, FCC and RoHS2 compliance
Features & Benefits
Recomended for:
Telecom PBX fraud detection and protection in the SME market and Call Centre quality monitoring
You can request the manual using the form hosted on the CONTACT page.